DYNAPLAST PET BLOW MOULDING MACHINE SUPERBLOW 8000 Electric
15 January 2019BLOW MOULDING MACHINE SB 8015 – 89.800 EURO
28 January 2019
The above figures are dependant on preform / bottle design and grade of PET
New modular heating system:
Based on closed , modular heating panels.Its special design gives a much higher efficiency heating needed for proper heating of preform.
General information
The Super Blow 3000E machine is a linear system for production of PET bottles
Electric drives have been used in all major systems of the machine
|
The servo-drives are applied on the following: stretching system, bottle ejection system, preforms positioning systems.
Using the servo drives instead of pneumatic ones, has the following advantages:
– The pressure fluctuations does not influence the machine’s working parameters
– High stability and repeatability of the process and subsequently, of the final product
– Lower utilization costs
MACHINE SYSTEMS SPECIFICATION, THEIR ADVANTAGES AND FUNCTIONS
hydro-pneumatic closing system
automatic measurement of preform and mould height by servo-drives, stretch
elimination function of incorrectly blown or cracked bottle with no any production process break
stabilization system and preform temperature control system with thermo cameras IR usage
function: „saving energy” of the oven
touch-screen panel with auto-diagnostics of machine
machine parameters’ memory for particular bottles’ sizes
flowing adjustment of capacity
system of fast change of moulds
bottle positioning in exit area – enabling direct connection to air conveyor
automatic external control function of switch on or off machine, depending on filling line work
parameters’ adjustment – entirely from control console
Technical Specifications
|
Utility requirements
|
|
|
Installed power
|
|
Number of cavities
|
2
|
Calculated output
For 0,25- 1,5L
2,0
2,5
3,0
|
3000 bph
2800
2600
2200
|
Total installed power, standard setup
|
55 kW
230/400V, 50 Hz
|
Bottle volume
|
0,25-3,0 l
|
Power consumption for 1,5L
|
25 kW
|
|
|
Equipment dimensions, LxWxH
|
|
40 bar/10 bar air consumption
Validity of these consumptions: at a temperature of 20 °C and at 0 – 500 m altitude
|
|
Blowing module
|
L3800 x W1800 x H3200
|
For 1,5 liters bottle 3000 b/h
(at 38 bar blowing pressure)
|
225 Nm3/h
|
Weight
|
|
10 bar (service air) consumption
|
90 Nm3/h
|
Total
|
4700 kg
|
|
blowing module section
|
4200 kg
|
|
Preform infeed section
|
500 kg
|
|
|